spec no: dsad2404 rev no: v.8 date: jun/01/2007 page: 1 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000067 notes: 1. all dimensions are in millimeters (inches), tolerance is 0 .25(0.01")unless otherwise noted. 2. specifications are subject to change without notice. package dimensions & internal circuit diagram 30.48mm(1.2 inch) 16 segment single digit alphanumeric numeric display features z 1.2 inch character height . z low current operation. z high contrast and light output. z easy mounting on p.c. boards or sockets. z categorized for luminous intensity. z mechanically rugged. z standard:gray face, white segment. z rohs compliant. part number: PSA12-11YWA yellow description the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode.
spec no: dsad2404 rev no: v.8 date: jun/01/2007 page: 2 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000067 selection guide part no. dice lens type iv (ucd) [1] @ 10ma min. typ. PSA12-11YWA yellow (gaasp/gap) white diffused 1200 4700 common anode, rt. hand decimal description electrical / optical characteristics at t a =25c absolute maximum ratings at t a =25c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. parameter yellow units power dissipation c,d,g,h,k,m,n,s,r,t 150 mw a,b,e,f,p,u and dp 75 dc forward current c,d,g,h,k,m,n,s,r,t 30 ma a,b,e,f,p,u and dp peak forward current [1] c,d,g,h,k,m,n,s,r,t ma a,b,e,f,p,u and dp reverse voltage c,d,g,h,k,m,n,s,r,t 10 v a,b,e,f,p,u and dp 5 operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3-5 seconds 140 symbol parameter device typ. max. units test conditions peak peak wavelength yellow 590 nm i f =20ma d[1] dominant wavelength yellow 588 nm i f =20ma ? 1/2 spectral line half-width yellow 35 nm i f =20ma c capacitance yellow 20 pf v f =0v;f=1mhz v f [2] forward voltage c,d,g,h,k,m,n,s,r,t yellow 4.2 5.0 v i f =20ma a,b,e,f,p,u and dp 2.1 2.5 i r reverse current c,d,g,h,k,m,n,s,r,t yellow 10 ua a,b,e,f,p,u and dp 10 v r = 10v v r = 5v ua note: 1. luminous intensity/ luminous flux: +/-15%. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v.
spec no: dsad2404 rev no: v.8 date: jun/01/2007 page: 3 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000067 PSA12-11YWA yellow note:the curves are on the segment a,b,e,f,p,u and dp.
spec no: dsad2404 rev no: v.8 date: jun/01/2007 page: 4 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000067 note:the curves are on the segment c,d,g,h,k,m,n,s,r and t.
spec no: dsad2404 rev no: v.8 date: jun/01/2007 page: 5 of 5 approved: wynec checked: joe lee drawn: z.z.yang erp: 1311000067 packing & label specifications PSA12-11YWA
|
